Видео

Great information, I scratched my Dura Ace FCR 9200 crankset, I cried too much, now I am trying to touch up. Thank you for the video

The darkest installation on the internet, to this day. All hail

whatever happened?

You have no idea what you're complaining about dude. Congrats on your trash post sensationalism though

JB Weld! Nice one. Yeah, the Arione rails always come unstuck

I'm pretty sure the only NTN bearings I can find here in the USA are fake. There are some distributors, but they seem super expensive or only bulk orders? I just need two bb30 6806 bearings!

Came back to this again. So good.

hey- great video. let's say hypothetically your ultegra spoke broke at the hub ( right inside that microscopic little hub nut). how would you replace it? i tried shimano part number Y4Ck89000 and it sorta works except it's about twice as long and the dust cap won't sit fully flush.

Thanks for the detailed video, I'm getting one after watching this. What's the seatpost equivalent with this level of engineering?

Nice one

Appreciate the video mate! Had me cracking up in the beginning.

I use these rings with a YBN sla 11 speed chain. Are you using a DuraAce chain? If so, that chain is optimized to use DuraAce chainrings. Just sayin...

I didn't realise the heel lugs were replaceable and bought a new pair of shoes. Doh! The lugs were really bad on this shoe... Really really bad.... The rest of the shoe was brilliant. I kept them and now use them on the trainer.

F💣 F💣 F💣 💩 👍😎 I’ll probably get a knock off🤷‍♂️

I was thinking about putting these in my dtswiss c1800, but without the seal and with the campagnolo bora bearing grease.

Nice video. I’ve been looking at replacing my d67 ceramic bearings with NTN bearings and bb bearings. Woupd taking the seals off still work ok in the wheels hubs? Thanks

My Tesla Model S with a 380kW motor has 2 SKF hybrid ceramic bearings for the rotor shaft. 380,000km so far........😂.

I did build mine by playing it like a Harp. Took a bit longer though since it was also my first time but it was not that hard and a bit fun to do to. I even checked the dish by laying it flat on a floor tile and it worked perfectly. I then just bought a cheap china made tension meter and I only had very minor changes done. I managed to get an almost perfectly tensioned wheel I think hehe. My only problem was I messed up the spoke length from 289 to 292 that made it poke through the nipples by like 3mm or more haha. I already tested it roughly on some hard rides and it held up quite well. I oiled my Generic Brand "Anrancee" Tension meter on the overlapping parts/spring so it reads better. I also sometimes get inaccurate readings when positioned vertical/reverse compared to just flat horizontal. I was able to get it to function and read better by letting go of the handle and pulling it apart to spread more and get maximum tension numbers.

You forgot to show the internal section of the big plastic tube that the pedal shaft passes through. On the R7000 pedals there are 2 plastic internal seal sleeves and that is why the pedals develop play specially if one of your feet is not straight ( inward or outward pointing). They are 2 plastic inner thin sleeves and once they wear out the pedal is useless, even though there is nothing wrong with pedal metal and bearing assembly. I can not believe that no one has picked up on this it is such an idiotic move on Shimano to not have the bearing assembly longer and closer to the inner edge, it is so far outward that those internal plastic sleeves wear out quickly and you may get noise due to this. This happens only with a foot that is inward or outward pointing setup with the shoes, this puts an angled rotation force on the pedal body which wears out those thin plastic inner sleeves.

Nice and detailed review. I just replaced my SI crankset for a hollowgram crankset with shorter, 165 mm crankarms. I would like to have the SISL 2 version but I couldn't find them in my lenght. There is a little bit of play in my new crankset, I think I been to get myself some 0.5 mm spacers. Cannondale does mention this in the documentation, but there were no shims in the original factory installation and the sizes are the same. Cheers!

Mate so much to discuss in 2023... shits hitting the fan with the cycling industry. Whens the next one?

To solve this problem, the Shaeffler Group (FAG) developed the Cronitect series bearings with rings made of a nitrided alloy like Cronidur 30 and rolling elements made of silicon nitride

Asi to dělá kazeta na té volnoběžce. Zkuste tam dát nový ořech. Ty malé oděrky to nezpůsobují. Ložiska a západky také ne. Je zbytečně nákladné je měnit. Ten ořech není moc kvalitní, kazeta ho brzy znovu poškodí. Takže ten nový ořech je jen dočasné řešení. Pak to bude skřípat znovu.

Anyone know how these would stack up to the DHB armwarmers? I've been pretty happy with mine. Keeps you cool and keeps you warm, especially when wet. For £24 the DHB ones feel like a steal compared to the £55 you would have to pay today for the Rapha ones. I do want to get the Rapha arm warmers for the sake of comparing them to the DHB ones, but from this review and from what I can see on their site, it looks like it's just stretchy merino in the shape of a tapering tube which is no different from the DHB arm warmers! At least with Rapha jerseys you get a brand specific aesthetic and for their bibs you get a Rapha chamois and straps (which I quite like), but these arm warmers; litterally no reason to spend more than double the price for the same thing.

I use hybrid bearings for my engine race bike

Great design, cringe logo.

Hello there mate just watched your video. Do you think a 48/32 chainring can fit on it? I’m thinking of replacing my chainring but not sure if it can accommodate the 32t. Thank you in advanced.

I normally use a permanent marker for the types of scratches-filling Down deep scratches might get me a better result though.

I hope you can bring these back someday.

My god I can't love this video enough...I've watched it so many times over the years!

Thank you. Mine fourth and pinkie toe went numb completely and I started to panic. My hips are out of place (I’ve gotten them realigned and stuff but they always pop back out) so I know it’s my nerves. I started doing these stretches and it helped!!!!

How75 years adults can do exercise for numbness in toes

Does that mean Praxis chainrings wear the chain out sooner?

Grease the shaft?

Do the bearings have a seal on just the one side? Might have to replace with that to avoid creaks.

9000 vs 9100 comparison?

Why are you using a spanner and not a cone wrench to set the adjustment?

I just installed a Kogel hybrid ceramic BB on my bike. Then i see this video. Now I am screwed! Lol..

loved this, lots of talk about bottom brackets and crank lengths haha

Шимано колеса и втулки - говно. Они их не умеют делать. Я проездил с десяток лет на шимано, постоянные проблемы, то настроить, то люфт, то шарики, то оськи, то спицы, ничего нет, ну его нафиг. Как поменял фирму и поставил на промах - сразу все забыл как страшный сон. что ультегра, что дюрейс, все говно собачье, рукожопность производителей.

Hi, do you use carbon paste and bolts thread locker ? Or nothing ?

Really missing that part 3, would have made for a fantastic guide if the series was completed.

my cassette broken for this reason maybe

So I have been using ceramic on my Cannondale for years with no problems, I have ss bearings on my lefty high quality and need to replace them every year my last set on my scalpel lasted 9 months so don't get it my ss fail and my hybrid last. The first set of bb30 from new lasted just over 12 months and the ceramic hybrid have been in for the last three years and thats around 4500m cross country winter riding and cannock chase and that's hard co components.

I appreciate this, thank you

How's life TDI? Any RUclips return planned?

instead of weighing 1 spoke with a possible rounding error, you could weigh all spokes and see if there's a difference. If there is a difference, it could be the nipple material. Maybe there isn't a difference, but you wouldn't notice if a DA spoke weighed 5.6 grams and an Ultegra weighed 6.4 grams, and you could still end up with 16 grams of total weight difference for 20 spokes.

Je lehký, drahý, ale ne bezpečný! Co jste čekal při takové váze?

Are you still out there?

A video that actually teaches you how to build a (fake) company.